Project managed by the Jet Propulsion Laboratory (JPL)
Flight Works will expand its work in micro gear pumps for propulsion applications in order to provide a highly capable propulsion and attitude control system (ACS) for asteroid proximity operations, landers and return capsules.
Flight Works is proposing to expand its work in micro gear pumps for propulsion applications in order to provide a highly capable propulsion and attitude control system (ACS) for asteroid proximity operations, landers and return capsules. In traditional systems, larger thrusters, specific to each mission, must be employed to counter the gravity field of the target. Also, throttling these larger thrusters for proximity operations and landing is not a trivial task. With the pump, the need for these larger, more expensive thrusters is eliminated. Instead the pump allows increasing (or decreasing) and controlling the thrust of the attitude control thrusters to the levels required for operating in the target’s gravity field by modulating the pump RPM/power. Typically, only a few tens of watts are needed for pump operations. Flight Works is prepared to develop and demonstrate a low cost micro pump capable of significantly increasing pressure and flow rate to the thrusters, to define a roadmap for larger increases if warranted, and to plan Phase II activities in order to reach a TRL 7 by the end of that phase. The technology builds on Aerojet Rocketdyne’s work for NASA’s on-going Green Propellant Infusion Mission (GPIM) and use the non-toxic hydroxyl ammonium-nitrate (HAN) -based propellant AF-M315E which provides 50% greater density-ISP than hydrazine. The micro pump leverages the Air Force Research Lab’s (AFRL) investments in pump-fed technologies for small spacecraft propulsion applications, which have led to steady state and pulsed hot fire tests with hydrazine and demonstrations with other propellants.